Pressure vessels are used in various industrial plants with significant amounts of gas, compressed, liquefied and dissolved under pressure. Pressure vessels are used for the transport and storage of these gases. Boilers are used in order to meet the steam required by industrial plants. This boiler and pressure vessels are required to fulfill the safety and duty required by the manufacturer on the one hand and the user on the other. This coordination needs to be ensured. For this purpose, each country has established control institutions within itself.
Pressure vessel maintenance
In pressure vessels, periodic checks must be carried out. For example, pipes in a boiler should be tested at test pressure before the air cools down in summer. Missing pipes must be replaced. Defects and damages caused by faults in pressure vessels are directly related to the knowledge level of the technical personnel. In order to train a knowledgeable staff, these people can be provided with full training in maintenance, attitude, service, repair and so on.
Even in a fully automated plant, there is a technical person who must press a button in a certain situation. Pressing this personnel ‘s finger at the right or wrong time may cause this plant to be saved or destroyed. It is a fact that it is inevitable to manufacture pressure vessels and boilers in accordance with the standards and rules that we believe have an important place in the opening of our developing manufacturing industry.
Pressure Vessel rules and main headings
The main pressure vessel rules in the world are listed below :
TSE, Turkish Standards Institute – Boiler and Pressure vessel rules
TL, Türk Loydu – Boilers and Pressure Vessel Rules
GERMANY, AD-Merkblaett, Anleitung für Druckbehaelter – Rules for pressure vessels
GERMANY, TRG, Technische Regeln Druckgase – Technical rules for pressure gas containers
GERMANY, TRD, Technical Regelung für Dampfkessel – Technical rules for steam boilers
USA, ASME, American Soceity Mechanical Engineers – Rules for boilers and pressure vessels
NORWAY, DnV, Det Norske Veritas – Boilers v «Pressure vessels rules
ITALY, RINA, Registro Italiano Navale, Boilers and pressure vessels rules
UK, BS, 5500 British Standards Institution
UK BSS, British Standard Specification
SWEDEN, Swedish Pressure Vessel Codes – Rules for Swedish Pressure Vessel
JAPAN, Japanese Pressure Vessel Codes – Japanese Pressure Vessel Rules
JAPAN, Japanese Std. PV Construction – Japanese “Construction of Pressure Vessels” Standard
JAPAN, Japanese High Pressure Gas Control Law – Japanese High Pressure Reed Control Law
GERMANY, Werkstoff-Und Bauvorschriften für Anlagen der Dampf-und Drucktecnik – Material and Construction Rules for Steam and Pressure Plants
FINLAND, SFSr- Standards
USSR, Regeln für Entwurf und Betriebssicherheit Von Druckbehaettern, Design of Pressure Vessels and Rules for operational safety
CANADA, CSA Standard B 51-1972
FRANCE, Bauschriften für Druckbehaelter des Syndicat National de la Chaudronnerie,
Industrielle (SNCT) Construction Rules for Pressure Vessels of SNCT
NETHERLANDS, Regels Voor Rules for Pressure Vessels
BELGIUM, General Defense of the Guardian (RGPT)
formula (Pressure Vessels)
A pressure or vacuum above atmospheric pressure; boilers, cooking vessels, collectors or other vessels containing steam, gas and liquids are called pressure vessels.
In general, closed vessels exposed to pressure from inside or outside are called Pressure Vessels.
In general, closed vessels exposed to pressure from inside or outside are called Pressure Vessels.
However, the pressure vessel descriptions here include nuclear reactors, Rotary or Piston machine cylinders and parts, pumps, compröscrler, turbines, hydraulic and pünematic cylinders etc. they don’t go into pressure vessels. Therefore, pressure vessels design rules are not applied to them. Special design rules are applied for these.
Depending on the raw material to be produced or mixed, 304 or 316 quality stainless is used.
Production characteristics of pressure vessels and reactors :
- It can be manufactured with serpentine or jacketed heating and / or cooling system.
- We can manufacture stainless steel reactors according to the required capacity, the chemicals to be used and the area to be placed.
- We manufacture economic reactors according to customer requests and needs.
- In addition, maintenance / repair and revision works of the reactors are carried out
- Internally cooled stainless reactor production is available.
- Design and manufacturing in accordance with international standards
- High quality and long life guarantee
- AISI 304, 316, 316L, 316Ti quality and certified stainless steel material
- Heating and cooling from jacket or half pipe serpentine on outer body and pull pipe serpentine on the inside
- 16 bar pressure and 300 ° C temperature resistance
- Specially designed mixer blades with wave breaker or foam breaker
- ATEX applications in hazardous areas
- Speed control with inverter
- Precision weighing with Loadcell
- Thermosyphon-cooled mechanical seal or soft seal
Reactors
Usually used in various fields in the chemical industry. Reactors that produce homogeneous mixtures, facilitate the reaction and perform operations such as heating and cooling are produced in Yapar Paslanmaz in all qualities. Our designs meet international standards. (These standards are listed above.)
